Welcome visitor you can login or create an account.

LATHE TOOLING

If you can not find the item your looking for please contact us at
mconomy@optusnet.com.au

Display: List / Grid
Show:
Sort By:
1/2 inch  5 PIECE INDEXABLE LATHE TOOL SET
FOR SALE IS THIS NEW INDEXABLE CARBIDE TIP SET 1/2 inch SHAFT 5 PIECE SET USES COMMONLY A..
$63.00
pratt/burnerd 4 inch 3jaw self centreing chuck
Used Pratt-Burnerd  4" chuck 3 jaw self centreing with both jaw sets threaded backing pl..
$135.00
Hercus 260 mt4-mt2 reducer sleeve--part No.5H922
used mt4-mt2 reducing sleeve used in the headstock spindle with an mt2 dead centre and mt..
$25.00
hercus 9 lathe 7 3/8" faceplate--part No.160
for sale is an original  Hercus 9" lathe cast iron faceplate 7 3/8" diameter threade..
$95.00
NEW Hercus 260 fixed steady--part No.5HY54
 NEW Hercus 260 fixed steady Genuine part   ..
$249.00
Based on 1 reviews.
1/2  inch boring bar
Used Lock 1/2 " boring bar  19mm" mounting bar as supplied with the Hercus 9" lathe ..
$42.00
New Hercus lantern thick toolpost wedge, half moon--part No.5H796, 54B
New Hercus lantern thick toolpost wedge--part No.5H796, 54B ..
$21.50
hercus 9 lathe fixed steady--part No.16BA008
used hercus 9" precision lathe fixed steady in excellent condition   ..
$165.00
hercus 9 lathe 4 inch chuck backing plate--part No.amh160a
AUSTRALIAN MADE 4" cast iron backing plate threaded 1 1/2 X 8tpi to suit Hercus 9", S..
$67.00
3 matching outside Jaws for pratt/burnerd 4" self centreing chuck, type 34, 58
mostly unused these are matching sets, suits pratt types 34 and 58  4" 3 jaw   ..
$68.00
burnerd 6" 4 jaw independant lathe chuck
USED UK MADE BURNERD 6" 4 JAW INDEPENDANT LATHE CHUCK FULLY WORKING, GOOD CONDITION. THRE..
$165.00
hercus steady riser
This riser block is to raise the Hercus lathe 9" fixed steady to the appropriate height to use wi..
$25.00
New dial for Hercus imperial thread chasing dial indicator--part No.amh5H943
New dial for Hercus imperial thread dial indicator--part No.amh5H943 this a copy of the genui..
$29.00
5 piece centre drill set
centre drill set Right Hand, 60 degree Made of H.S.S. and precision ground Include on..
$12.00
hercus 9 or 260 spindle thread cover--part No.amh5H1091
  This NEW cover threaded for Hercus 9 lathe or threaded for the Hercus 260, please ..
$25.00
Based on 1 reviews.
NEW Hercus imperial thread chasing dial--part No.5HA51
NEW Hercus imperial thread chasing dial--part No.5HA51 This is made by both F.W.Hercus and AM..
$145.00
burnerd 6" 4 jaw chuck
 Used Burnerd 6" 4jaw independant chuck  threaded to suit a hercus 260 spindle ..
$165.00
 Hercus 9 lathe 4-way toolpost--part No.amh4W9a
New Hercus 9 lathe 4-way toolpost--part No.amh4W9a made in Australia  by AMH to suit the..
$175.00
Hercus 9 lathe, 5 inch chuck backing plate--part No.amh160b
Australian made 5 inch cast iron chuck backing plate threaded 1 1/2" X 8tpi to suit hercu..
$74.00
hercus 9 dog plate
used hercus 9" dog plate for turning between centres excellent condition ..
$49.00
Based on 1 reviews.
Hercus 260 lathe 4-way toolpost--part No.amh5H781a
NEW Hercus 260 4-way toolpost--complete assy--part No.amh5H781a steel toolpost block, 8 harde..
$170.00
Hercus straight  tool holder
used straight tool holder Australian made 22mm high shank takes 1/4" hss as suppl..
$35.00
30mm lathe dog
Australian made used  straight lathe dog from hercus 9" and 260 33mm opening &nb..
$20.00
hercus compound t-nut
NEW t-nut for the original hercus 4-way toolpost nut bears on the entire width of the t-slot ..
$15.00
AXA100 adaptor stud for hercus 260
NEW custom made high tensile adaptor stud  for mounting the AXA100 quickchange toolpost,..
$15.00
NEW Hercus 260 travelling steady--part No.5HY55
NEW Hercus 260 travelling steady--part No.5HY55 genuine part ..
$209.00
hercus 9 travelling steady--part No.16BA007
Used Hercus 9 inch travelling steady, little or no wear. if out of stock, I will take back or..
$145.00
NEW hercus 9 or 260 lantern toolpost
NEW hercus 9 or 260 lantern toolpost genuine Hercus new parts ..
$118.00
New individual 3c collets
Brand new individual 3c round collets remaining sizes 7/32, 9/32, 3/8,13/32 only one ..
$20.00
Hercus lantern toolpost wedge, half moon--part No.5H795, 54
NEW Australian made half moon, wedge insert for Hercus or South bend lantern-american toolpost ..
$17.00
NEW Hercus metric thread chasing dial--part No.5HA52
NEW Hercus metric thread chasing dial--part No.5HA52 last stocks of genuine new parts the..
$172.00
hercus 260 5inch chuck backing plate--part No.amh5H907
Australian made  Cast iron 5" chuck backing plate threaded for the Hercus 260 lathe ..
$74.00
ER32 SPANNER---part No.5H995
NEW ER32 collet C-Spanner stainless steel  see also ER32 collet chuck and spanner li..
$10.00
NEW Hercus lantern toolpost concave ring--Part Nos.5H794, 53
NEW Hercus lantern toolpost concave ring--Part Nos.5H794, 53 Hercus genuine part ..
$22.00
MT2 live centre
MT2 live centre Material: Tool steel(T10, 40Cr)   Accuracy: 0.01mm   ..
$39.50
carbide insert for 1/2" 5 PIECE INDEXABLE LATHE TOOL SET
PACK OF 10 replacement tips for 1/2"  tool set TCMT16T304 HQ CA5525 Fine to..
$85.00
NEW hercus lantern toolpost main post--Part Nos.5H791, 52
NEW hercus lantern toolpost main post--Part Nos.5H791, 52 Genuine Hercus part ..
$55.00
NEW C pin spanner- Hercus compound bush---part No.5h994
NEW C pin spanner- Hercus compound bush---part No.5h994 see location photo Hercus 260 or ..
$14.00
NEW Hercus lantern toolpost square base washer--Part Nos.amh5h793, amh41
NEW Hercus lantern toolpost square base washer--Part Nos.amh5h793, amh41 made in Australia to..
$14.00
New Hercus graduated  dial for metric thread chaser---part No.5H953
New Hercus graduated  dial for metric thread chaser---part No.5H953 brand new genuine pa..
$30.00
NEW Hercus 260 4-way toolpost block --part No.amh5H781
NEW Hercus 260 4-way toolpost block-steel--part No.amh5H781 Australian made 2 1/2 inch sq..
$115.00
5/8 hss parting blade
HSS parting tool blade tapered for clearence 3/32"(W)(TOP) X 5/8"(H) X 5"(L) suits lo..
$11.00
New Hercus 9 lathe 4-way toolpost block--part No.amh4W9
New Hercus 9 lathe 4-way toolpost block made by AMH to suit allows up to 3/4 inch high to..
$105.00
hss righthand tool holder
Used righthand tool holder for Hercus lathe with lantern(american style) toolpost lock brand&..
$30.00
NEW Hercus plain carriage stop --part No.5HA77
NEW  Hercus plain carriage stop--part No.5HA77 cast iron genuine part,  last of..
$81.00
hss lefthand tool holder
  Used lefthand tool holder for Hercus lathe with lantern(american style) toolpost &..
$30.00
NEW Hercus 260 thread cutting stop--part No.amh5HA53
NEW Hercus 260  thread cutting stop--part No.amh5HA53 Fully Australian made list pri..
$89.00
Hercus 3/8 spanner--part No.5H991, 55
NEW 3/8" spanner for hercus, Sheraton and South Bend  lathes   ..
$7.50
adjustable clamping lever m14 X 2
adjustable clamping lever m14 X 2 female thread 100mm overall length ..
$9.00
New top half of Hercus 260 fixed steady--part No 5H971
New top half of Hercus 260 fixed steady--part No 5H971 genuine part ..
$59.00