Welcome visitor you can login or create an account.

HERCUS 9" LATHE

Hercus 9" (Inch) Lathe

Display: List / Grid
Show:
Sort By:
hercus 9" headstock
hercus 9" headstock assembly, cast iron bearing surfaces, in excellent condition, comes with spin..
$155.00
hercus 9" repair kit
This manual, gasket and felt kit are for the South Bend 9" which the Hercus was a clone of. A..
$72.00
Hercus imperial crosslide  spindle nut
BRAND NEW bronze imperial cross feed spindle nut to suit Hercus 9" and 260 lathe will al..
$52.00
Based on 1 reviews.
hercus 46 tooth gear
  46 tooth gear   to suit Hercus, sheraton, southbend 9" or hercus 260 ..
$36.00
NEW hercus 9c or 260c imperial crosslide spindle
BRAND NEW hercus 9 or 260 model C imperial models only     ..
$98.00
HERCUS 9" MOTOR MOUNT
USED HERCUS 9 INCH LATHE "H" PATTERN MOTOR MOUNT ..
$25.00
260 half nut handle
used Hercus 260 and 9" halfnut engaging handle in good condition. both "A" , "B" and "C"..
$30.00
AXA100 quickchange knurling, turning and facing toolholder
new in stock AXA100 knurling, facing and turning tool holder takes up to 1/2" tooling..
$53.00
bronze casting- crosslide spindle nut
for the D.I.Y. Hercus owner we offer a raw casting of the 9" or 260 bronze crosslide spindle ..
$12.00
hercus 9" or 260 lathe tumbler gear
 BRAND NEW made in Australia to suit Hercus lathes 32 tooth reverse tumbler gear for..
$29.00
1/2"  5 PIECE INDEXABLE LATHE TOOL SET
FOR SALE IS THIS NEW INDEXABLE CARBIDE TIP SET 1/2" SHAFT 5 PIECE SET USES COMMONLY AVAIL..
$63.00
hercus 260 or 9inch  half nuts metric
these used hercus 260 or 9"  metric half nuts suit all metric models and as can seen are in ..
$95.00
hercus bullgear pin
used bullgear pin in good condition, (or NEW subject to availability) new retaining clip..
$12.00
hercus 27 tooth gear
  27 tooth gear   to suit Hercus, sheraton, southbend 9" or hercus 260 ..
$26.00
hercus 50 tooth gear
  Hercus 50 tooth gear Similar to gear pictured to suit Hercus, sheraton, southb..
$41.00
hercus bullgear
used  bullgear for Hercus 9" lathe all models ..
$125.00
hercus milling attachment
Hercus milling attachment with vice metric or imperial dials  $495.00 because of..
$495.00
idler gear bolt set
Used Hercus compound idler gear bolt, bush, washer and nut suits 9" and 260 models a..
$12.00
hercus 45 tooth gear
  45 tooth gear similar to pictured gear   to suit Hercus, sheraton, so..
$34.00
gib screw and nut
used gib screws  hercus 9" and 260 lathes free postage Australia wide ..
$5.20
hercus 9" dog plate
used hercus 9" dog plate for turning between centres excellent condition ..
$49.00
Based on 1 reviews.
apron handwheel
used Hercus 260 apron handwheels with handle in good used condition also suits hercus  9..
$35.00
Hercus Model 9 "A" inch-metric gear set
For owners with Hercus 9a imperial with 8tpi leadscrew here is the complete set of gears requ..
$295.00
hercus 9" headstock spindle
Used headstock spindle for the hercus 9" headstock non roller bearing models ..
$90.00
hercus 80 tooth gear
80 tooth change gear to suit Hercus, sheraton, southbend 9" or hercus 260 genuine used h..
$49.00
ELECTRIC MOTOR 1/2 hp CMG 240v REVERSING
FOR SALE ARE THESE BRAND NEW CMG 1/2HP 240VOLT MOTORS, REVERSING CAPABLE 14mm shaft 5mm k..
$157.00
hercus tumbler gear assy
used reverse tumbler assy to suit hercus 9" lathe complete with all gears except the 20 tooth..
$125.00
BRAND NEW hercus tailstock locking lever
BRAND NEW hercus tailstock barrel locking lever   fits all 9" and 260 tailstocks and..
$18.00
hercus 30 tooth gear
  30 tooth gear   to suit Hercus, sheraton, southbend 9" or hercus 260 ..
$26.00
hercus 52 tooth gear
Hercus 52 tooth gear similar to gear pictured to suit Hercus, sheraton, southbend 9 or he..
$41.00
hercus banjo bracket
hercus 9" lathe banjo bracket ..
$25.00
hercus 9" travelling steady
Used Hercus 9 inch travelling steady, little or no wear. ..
$125.00
hercus milling attachment
Hercus milling attachment imperial or metric dials because of the shortage of these, they..
$375.00
hercus 44 tooth gear
  44 tooth gear   to suit Hercus, sheraton, southbend 9" or hercus 260 ..
$33.00
belt tension handle
Used Hercus 9" jathe belt tension handle condition excellent ..
$18.00
260 cabinet
used genuine factory hercus 260 lathe cabinet  will freight at buyers cost or pick u..
$195.00
Hercus spindle washer
NEW take-up nut washer for Hercus 9" lathe headstock spindle with inbuilt locating pin ..
$5.00
imperial compound spindle nut
new  bronze imperial compound spindle nuts to suit Hercus 260 or 9" fully australian mad..
$39.00
5" CHUCK BACKING PLATE
Australian made 5" cast iron chuck backing plate threaded 1 1/2" X 8tpi to suit hercus 9"..
$60.00
HERCUS 9" H PATTERN ASSEMBLY
USED HERCUS 9" LATHE VERTICAL MOUNT "H" PATTERN EXCELLENT CONDITION ..
$39.00
hercus 260 or 9" saddle lock
hercus 260 or 9" carriage lock- cast iron body-excellent condition will also fit  sherat..
$23.00
hercus toolpost set screws
 set of 8   NEW Australian made set screws for the Hercus 4 way toolpost 3/8" squar..
$36.00
hercus 32 tooth gear
32 tooth gear to suit Hercus, sheraton, southbend 9" or hercus 260   genuine use..
$26.00
hercus 54 tooth gear
Hercus 54 tooth gear Similar to gear pictured to suit Hercus, sheraton, southbend 9 or he..
$41.00
hercus 9" a model apron
Hercus 9 lathe Model A imperial apron, includes 1/2 nuts fully functional units ..
$285.00
headstock cone pulley
used Hercus 9 inch headstock cone pulley excellent condition ..
$125.00
hercus countershaft pivot
Used countershaft pivot for Hercus 9" lathe excellent original condition this part is for..
$55.00
hercus spindle thread cover
  This NEW cover threaded for Hercus 9 lathe or threaded for the Hercus 260, please ..
$25.00
Based on 1 reviews.
1/2 " boring bar
Used Lock 1/2" boring bar 3/4" high mount as supplied with the Hercus 9" lathe ..
$42.00
hercus 60 tooth gear
60 tooth gear to suit Hercus, sheraton, southbend 9" or hercus 260 genuine used hercus or..
$44.00