Welcome visitor you can login or create an account.

HERCUS 260

Hercus 260 Lathe

Display: List / Grid
Show:
Sort By:
1/2 inch  5 PIECE INDEXABLE LATHE TOOL SET---part No.23000
FOR SALE IS THIS NEW INDEXABLE CARBIDE TIP SET 1/2 inch SHAFT 5 PIECE SET USES COMMONLY A..
$63.00
260 or 9 inch half nut handle--part Nos.5H611, 29
used Hercus 260 and 9" halfnut engaging handle in good condition. both "A" , "B" and "C"..
$35.00
NEW Hercus tailstock eccentric shaft--part No.5H78
NEW Hercus tailstock eccentric shaft--part No.5H78 genuine Hercus part ..
$55.00
NEW Hercus 260 travelling steady--part No.5HY55
NEW Hercus 260 travelling steady--part No.5HY55 genuine part ..
$209.00
New Hercus 260 bed levelling bush--part No.5H16
New Hercus 260 bed levelling bush--part No.5H16 genuine parts ..
$7.75
NEW hercus 260 motor mount--part No.5H241
new genuine part 124mm X 76mm bolt pattern suits 3/4hp B56 type motor listed on this site..
$66.00
Hercus metric cross slide spindle nut--part Nos.935, 5H726
NEW Metric cross slide spindle nut cast iron for hercus 9" & 260 All metric Model..
$59.00
AXA100 adaptor stud for hercus 260
NEW custom made high tensile adaptor stud  for mounting the AXA100 quickchange toolpost,..
$15.00
NEW rack for Hercus 40" bed--part Nos. 112, 5H21
NEW rack for Hercus 40" bed--part Nos. 112, 5H21 suits all 9 and 260 models length 23 1/4..
$88.00
NEW hercus 260 or 9 inch saddle lock--part Nos.amh5h705,amh5H706,19, amh42
 NEW hercus 260 or 9" carriage lock- cast iron body, steel screw will also fit  she..
$39.00
1/2  inch boring bar
Used Lock 1/2 " boring bar  19mm" mounting bar as supplied with the Hercus 9" lathe ..
$42.00
NEW Hercus 260 tailstock handwheel spring pin--part No.5H90
NEW Hercus260 tailstock handwheel spring pin--part No.5H90 some early 260's may have taper pi..
$0.50
Used Hercus 260 travelling steady----part No.5HY55
Used Hercus 260 travelling steady----part No.5HY55 ..
$145.00
Hercus apron handwheel--part Nos.26 or 5H633
used Hercus 260 apron handwheels with handle in good used condition also suits hercus  9..
$35.00
NEW Hercus tailstock cam shaft keep screw--part No.5H81, 624
NEW Hercus tailstock cam shaft keep screw--part No.5H81, 624 genuine Hercus part ..
$4.15
New Hercus 260 t- slotted compound rest---part No.5H756
New Hercus 260 t- slotted compound rest---part No.5H756 not for the 9 inch models ..
$138.00
hercus 260 dog plate--part No.5H901
used hercus 260 drive dog plate in excellent condition ..
$67.00
Hercus 9 or 260 idler gear bolt set--part No.104, 111, 5H585, 5H586
Used Hercus compound idler gear bolt, bush, washer and nut suits 9" and 260 models a..
$12.00
NEW Hercus 260 back gear---part No.5H131
NEW Hercus 260 back gear genuine Hercus made part ..
$165.00
NEW rack for Hercus 49 inch bed-- part Nos.5H22, 912
NEW rack for Hercus 49 inch bed-- part Nos.912, 5H22 length 83cm genuine part suits 9..
$110.00
hercus 260 metric gearbox--part No.5HY9
used hercus 260 metric gearbox in good working order add $95 for leadscrew and rear bush. ..
$450.00
hercus 260 belt tension nut--part No.5H237
Used belt tension nut  for the hercus 260 ..
$18.00
NEW hercus A and B model imperial cross  slide spindle--part Nos.5H731, 383
BRAND NEW Hercus imperial cross slide spindle 100% Australian made for power cross fe..
$128.00
New Hercus 260 counter shaft cone pulley---part No.5H212
New Hercus 260 counter shaft cone pulley---part No.5H212 New genuine part ..
$125.00
Pratt-Burnerd 5 inch 3 jaw self centreing chuck, outside jaws--Pratt-Burnerd part No.2210-13602
Pratt-Burnerd 5 inch 3 jaw self centreing chuck, outside jaws--Pratt-Burnerd part No.2210-13602 ..
$88.00
hercus 100/127 compound gear set---part Nos.143,144,144, 145a
Australian made to suit the Hercus 9" lathe includes 100t and 127t gears, bush, key and s..
$189.00
hercus tailstock clamp--part No.7 or 5H75
used Hercus tailstock clamp plate fits 9" and 260 tailstock ..
$18.00
NEW Hercus tailstock cam clamping nut--part Nos.5H77, 623
NEW Hercus tailstock cam clamping nut--part Nos.5H77, 623 genuine Hercus part ..
$16.50
NEW hercus 9 or 260 change gear (banjo) bracket--part Nos.96, 5H581
NEW hercus 9 or 260 change gear (banjo) bracket--part Nos.96, 5H581 Brand new genuine part ..
$81.00
NEW Hercus lathe grub screw and pad for graduated cross slide dial---part Nos.5H739, 5H738
NEW Hercus lathe grub screw and pad for graduated cross slide dial---part Nos.5H739, 5H738 ..
$4.00
Hercus 260 cabinet
used genuine factory hercus 260 lathe cabinet  pick up only also cabinets for 9" her..
$195.00
hercus 9 inch back gear--part No.72
Used or refurbished Hercus 9" lathe back gear   ..
$125.00
NEW Hercus 260 motor mount--part No.5H242
NEW Hercus 260 motor mount--part No.5H242 same physical size as 5H241 with dual bolt patt..
$68.00
260 headstock assy
hercus 260 headstock assy includes:- headstock casting , tapered roller bearings and spindle ..
$325.00
Based on 1 reviews.
hercus 260 motor pulley--part No.5H257
used twin motor pulley for a Hercus 260 lathe Standard size pulley bores 14mm. 5/8" or 3/..
$55.00
Hercus 260 lathe 4-way toolpost--part No.amh5H781a
NEW Hercus 260 4-way toolpost--complete assy--part No.amh5H781a steel toolpost block, 8 harde..
$170.00
New Hercus 260 headstock body---part No.5H101
New Hercus 260 headstock body---part No.5H101 genuine new Hercus made part ..
$360.00
New Hercus 260G (geared head model) motor frame---part No.5H381
New Hercus 260G (geared head model) motor frame---part No.5H381 ..
$495.00
260 drive frame--part No.5H201
Used hercus 260 drive frame casting, excellent condition ..
$195.00
New hercus 9 or 260  tailstock nut--part No.3, 5H87
New hercus tailstock nut suits all models 9" and 260 genuine parts ..
$19.00
NEW hercus 260 tumbler gear casting--part No.5H161
NEW hercus 260 tumbler gear casting--part No.5H161 brand new genuine part Hercus list pri..
$91.00
NEW handle for Hercus tailstock handwheel and crank handles---part Nos.5H89, 5H741
NEW handle for Hercus tailstock handwheel and crank handles---part Nos.5H89, 5H741 ..
$12.00
hercus 260 tumbler shaft and gears
used hercus 260 reverse tumbler shaft and gears, excellent condition. ..
$45.00
NEW Hercus 260 fixed steady--part No.5HY54
 NEW Hercus 260 fixed steady Genuine part   ..
$249.00
Based on 1 reviews.
Hercus 54/18 compound gear--part No.amh5H805
 hercus 54/18 compound gear to suit Hercus, sheraton, southbend 9" or hercus 260 ..
$71.00
hercus 260 compound assy--part No.5h755all
Used complete compound assembly  includes: top casting, gib strip, gib screws, swive..
$175.00
New Hercus 260G (geared head model) selector sleeve---part No.5H356
New Hercus 260G (geared head model) selector sleeve---part No.5H356 genuine Hercus part ..
$79.00
NEW hercus bullgear pin--part Nos.5H118, 86
NEW bullgear pin  genuine Hercus made part new retaining clips also listed  ..
$12.50
hercus  260 spindle thread cover--part No.amh5H1091
  This NEW cover threaded for  the Hercus 260 protects the spindle thread from ..
$25.00
Based on 1 reviews.