AMH
Australian made
to suit the Hercus 9" lathe
includes 100t and 127t gears, bush, key and s..
$189.00
NEW Hercus 260ATM gearbox thread plate----part No.5H592
..
$30.00
NEW Hercus 260 fixed steady
currently only taking back orders
..
$279.00
Australian made 5 inch cast iron chuck backing plate
threaded 1 1/2" X 8tpi
to suit hercu..
$83.00
NEW Hercus 260 4-way toolpost--complete assy--part No.amh5H781a
steel toolpost block, 8 harde..
$185.00
Hercus 9 or 260 imperial cross slide spindle nut (bronze)---part Nos.22, 5H725
a cast iron ve..
$64.00
Australian made
used straight lathe dog from hercus 9" and 260
33mm opening
..
$20.00
NEW Hercus 9a gearbox index plate----part No.363
brass plate, acid etched and paint filled
..
$35.00
AUSTRALIAN MADE
4" cast iron backing plate
threaded 1 1/2 X 8tpi
to suit Hercus 9", S..
$71.10
NEW custom made high tensile adaptor stud
for mounting the AXA100 quickchange toolpost,..
$15.00
hercus 54/18 compound gear
to suit Hercus, sheraton, southbend 9" or hercus 260
..
$71.00
AUSTRALIAN MADE
4" cast iron backing plate
threaded 1 3/4" X 8 tpi to suit the Hercus 260..
$71.10
NEW Hercus 260 headstock front taper roller bearings, economy version---part Nos.5H104e
18690..
$75.00
used 230mm faceplate
original part No.5H904
to suit the Hercus 260 all models
..
$125.00
NEW Hercus260 tailstock handwheel spring pin--part No.5H90
some early 260's may have taper pi..
$0.50
New 120/127 compound idler gear
7/8" bore
original large format Metric to imperial ..
$209.00
Hercus 9 tailstock clamp bolt and nut- early model 3/4 spanner drive
7/16 whitworth (bsw) thr..
$15.00
NEW Hercus tailstock handwheel taper pin--part No.4a
correct size as specified in the Hercus ..
$3.00
NEW Hercus 260 headstock rear taper roller bearing - economy price---part No.5H105e
bearing 1..
$75.00
new bronze imperial compound spindle nuts to suit Hercus 260 or 9"
fully australian mad..
$39.00
Australian made
Cast iron 5" chuck backing plate
threaded for the Hercus 260 lathe ..
$83.00
***BRAND NEW***
hercus tailstock spindle to suit all models 9" and 260
..
$45.00
NEW hercus 9 roller bearing headstock front bearings- economy price --part No.825e
bearing 18..
$30.00
BRAND NEW
hercus 9
model C
imperial models only
..
$98.00
NEW hercus 9 travelling steady--part No.16BA007
these are currently being cast at the foundry..
$206.00
take-up nut washer for Hercus 9" lathe headstock spindle with inbuilt locating pin
..
$8.00
NEW hercus 9 roller bearing headstock rear bearings-economy version --part No.826e
cone 14138..
$30.00
NEW Hercus metric cross slide dial
suits 9" and 260 all models from serial No.10338 onwards
..
$39.00
New countershaft bush for Hercus countershaft
cast iron construction
3/4 inch bore
pa..
$43.00
NEW hercus 9 lathe fixed steady--part No.16BA008
these are currently being cast at the foundr..
$249.00
NEW Australian made half moon, wedge insert for Hercus or South bend lantern-american toolpost
..
$17.00
NEW Hercus 9 needle roller thrust race, replaces fibre washer part No.77----part No.77r
total..
$12.20
BRAND NEW crosslide spindle bush
large dia 37.54mm length 41mm
see red area of location d..
$22.00
BRAND NEW
made in Australia to suit Hercus lathes
32 tooth reverse tumbler gear for..
$27.00
NEW Hercus ATM, DGM leadscrew nut----part No.5H55
used on the righthand end of the leadscrew
..
$0.45
BRAND NEW
hercus tailstock barrel locking lever
fits all 9" and 260 tailstocks and..
$18.00
axa-100 quick change tool post full 6 piece set---part No.axa-100, (adaptor stud part No.QC-03 to..
$215.00
BRAND NEW crosslide spindle bush
large dia 37.54mm length 53mm
see red area of location d..
$24.00
NEW Hercus 9 extended t-slotted cross slide-- part No.5H1001-9
The inserted dial it is mainly..
$460.00
BRAND NEW
Metric cross slide spindle for AM and BM model 9" 0r 260 lathe ATM and BTM
..
$118.50
hercus lathe 63-64 compound idler gear
AUSTRALIAN MADE
5/8" bore, fits on standard idler ..
$126.00
BRAND NEW
Hercus imperial cross slide spindle
100% Australian made
for power cross fe..
$128.00
NEW 250-101 Turning and Facing Holder for AXA100 Quick Change Tool Post----part No.axa-101
..
$28.00
NEW 6203-2RS bearing for Hercus 260 countershaft----part No.5H206
rubber sealed bearing, remo..
$6.00
All additional gears required for cutting standard imperial threads 4-48tpi on a..
$359.85
cross slide crankhandle, dome nut and woodruff key
suits Hercus 9, 260 and south ..
$48.00
New dial for Hercus imperial thread dial indicator--part No.amh5H943
this a copy of the genui..
$29.00
NEW Keyless tailstock chuck 1-13mm capacity, MT2 taper---part No.23003
suits tailstock taper ..
$37.50
This NEW cover threaded for the Hercus 260
protects the spindle thread from ..
$25.00
New Hercus lathe nameplate---part No.16b0371a
etched brass plate 2 5/8 X 1 inch
..
$15.00
