Welcome visitor you can login or create an account.

hercus 9 repair kit

hercus 9 repair kit
Brand: ILION
Product Code: 9a-mrk
Reward Points: 0
Availability: 12
$115.00

This manual, gasket and felt kit are for the South Bend 9" which the Hercus was a clone of.

Apart from motor mount all other sections are very applicable to the Hercus

Owners should find this kit very useful.

The only part of the kit not useful on the Hercus lathe are the 2 red o rings.

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Related Products(66)
HERCUS 9 - H PATTERN ASSEMBLY--part No.M32
hercus 9 tailstock
hercus 9 lathe 7 3/8" faceplate--part No.160
hercus 9 or 260 imperial thread chasing dial--part No.5HA51
hercus bullgear guard--part No.80
hercus 9 lathe rear leadscrew bracket--part No.93
hercus 9 headstock
used or refurbished  hercus 9 bullgear--part No.71
hercus 9 or 260 change gear (banjo) bracket--part No.96, 5H581
hercus 9 drive pulley--part No.M23
hercus 9 lathe fixed steady--part No.16BA008
burnerd 6 inch 4 jaw independant lathe chuck--part No.23015
hercus 9 dog plate--part No.032
hercus 260 tumbler shaft and gears
30mm lathe dog
hercus 9 or 260 lantern toolpost--part No.5HA035
New hercus way felts--part Nos.16, 5H708
Used Hercus 9 or 260 metric  thread chasing dial--part No.5HA52
hercus tumbler gear assy
hercus 260 or 9 inch saddle lock--part Nos.5h705,5H706,19, 42
hercus 9 imperial gearbox
hercus 36/18 compound gear--part No.amh5H807
South Bend/ Hercus/ Sheraton 9 repair manual 2008--part No.sbm
hercus 9 tailstock
hercus 9 repair kit
hercus 9 travelling steady--part No.16BA007
headstock cone pulley--part No.506
hercus countershaft pulley--part No.505A
flat belt pulley set
DVD of the Hercus 260 text book of turning, plus extras--part No.dvd-01
NEW hercus 9 or 260 tailstock spindle--part No.amh9. amh5H86
260 or 9 inch half nut handle--part Nos.5H611, 29
Hercus apron handwheel--part Nos.26 or 5H633
Hercus spindle take up nut washer--part No.77
gear safety guard--part No.369
hercus tailstock clamp--part No.7 or 5H75
hercus 9 C model apron--part No.24
New hercus 9 or 260  tailstock nut--part No.3, 5H87
hercus change gear guard--part No.106
Hercus change gear guard bracket --part No.107
hercus leadscrew gear--part No.362
Hercus lantern toolpost wedge, half moon--part No.5H795, 54
NEW hercus bullgear pin--part Nos.5H118, 86
BRAND NEW hercus tailstock locking lever--part No.amh5H91, 5
hercus 9 or 260 toolpost set screws--part No.amh5H782
NEW hercus handwheel pinion gear--part Nos.47, 5H631
hercus 63/64 compound gear
hercus 9 and 260 way felt retainers--part Nos.amh16A, amh5H709, amh5H710
hercus 9 motor belt cover/guard--part No.645
NEW Hercus metric cross slide spindle nut--part Nos.935, 5H726
Hercus 9 or 260 idler gear bolt set--part No.104, 111, 5H585, 5H586
hercus countershaft pivot/yoke--part No.M3
Hercus 9 turret attachment
Hercus quill gear guard--part No.79
faceplate for Hercus 260--part No.5H904
imperial compound spindle nut--part Nos.36, 5H752
hercus  260 spindle thread cover--part No.amh5H1091
9" roller bearing or plain headstock pulley cover/guard--part No.841, 630
NEW hercus tailstock handwheel--part No.amh4, amh11, amh5H88, amh5H89
hercus countershaft tension assy--part Nos.m17, m6, m18, m119,m15,m13,m11,m16
hercus C model felt rebuild  kit--part No.9cfk
Hercus A model felt rebuild kit
hercus 9 lathe motor pulley--part No.M27
Hercus gib screw and nut --part Nos.5H723, 5H724, 57a, 57b
belt tension handle--part No.M119
NEW hercus 9 or 260 lathe tumbler gear-reverse twin gear--part Nos. amh5H171, amh94