Welcome visitor you can login or create an account.

hercus 260 or 9 inch saddle lock--part Nos.5h705,5H706,19, 42

hercus 260 or 9 inch saddle lock--part Nos.5h705,5H706,19, 42
Brand: HERCUS
Product Code: 5h705,5H706, 19,42
Reward Points: 0
Availability: 41
$39.00

 hercus 260 or 9" carriage lock- cast iron body, steel screw

will also fit  sheraton 9 and south bend

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Related Products(91)
HERCUS 9 - H PATTERN ASSEMBLY--part No.M32
hercus 9 tailstock
hercus 9 lathe 7 3/8" faceplate--part No.160
hercus 9 or 260 imperial thread chasing dial--part No.5HA51
hercus bullgear guard--part No.80
hercus 9 lathe rear leadscrew bracket--part No.93
front leadscrew bracket--part No.92
hercus 9 headstock
used or refurbished  hercus 9 bullgear--part No.71
hercus 9 or 260 change gear (banjo) bracket--part No.96, 5H581
hercus 100/127 compound gear set---part Nos.143,144,144, 145a
hercus 9 lathe fixed steady--part No.16BA008
burnerd 6 inch 4 jaw independant lathe chuck--part No.23015
HERCUS 9 MOTOR MOUNT--part No.M33
260 drive frame--part No.5H201
hercus 260 tumbler gear casting--part No.5H161
hercus 260 rear guard--part No.5H265
hercus 260 top cover--part No.5H281
burnerd 6" 4 jaw chuck
NEW hercus 260 micro switch--part No.5H295
hercus 260 front guard--part No.5H272
NEW hercus 260 motor mount--part No.5H241
hercus 9 dog plate--part No.032
hercus 260 dog plate--part No.5H901
Hercus 260 cabinet
hercus 260 tumbler shaft and gears
hercus 60 tooth change gear--part No.5H860
hercus 260 and 9 80t idler gear--part Nos.5H802, 98, 98a
72/18 compound idler gear--part Nos.101,103, 5H804
30mm lathe dog---part No.23051
hercus 260 headstock assembly--part No.5HY1
hercus 9 or 260 lantern toolpost--part No.5HA035
New hercus way felts--part Nos.16, 5H708
hercus tumbler gear assy
hercus 260 or 9 inch saddle lock--part Nos.5h705,5H706,19, 42
260 headstock assy
hercus 9 imperial gearbox
Hercus 54/18 compound gear--part No.amh5H805
NEW hercus 45/18 compound gear--part No.5H806
hercus 36/18 compound gear--part No.amh5H807
South Bend/ Hercus/ Sheraton 9 repair manual 2008--part No.sbm
Used  hercus 260- 0 mill  bullgear--part No.5H116
hercus 9 tailstock
hercus 9 repair kit
hercus 9 travelling steady--part No.16BA007
headstock cone pulley--part No.506
hercus countershaft pulley--part No.505A
flat belt pulley set
NEW hercus 9 or 260 tailstock spindle--part No.amh9. amh5H86
hercus tailstock barrel (quill)--parts Nos. 8, 5H85
260 or 9 inch half nut handle--part Nos.5H611, 29
Hercus apron handwheel--part Nos.26 or 5H633
Hercus spindle take up nut washer--part No.77
gear safety guard--part No.369
hercus tailstock clamp--part No.7 or 5H75
hercus 9 C model apron--part No.24
New hercus 9 or 260  tailstock nut--part No.3, 5H87
hercus change gear guard--part No.106
Hercus change gear guard bracket --part No.107
hercus leadscrew gear--part No.362
Hercus lantern toolpost wedge, half moon--part No.5H795, 54
NEW hercus bullgear pin--part Nos.5H118, 86
BRAND NEW hercus tailstock locking lever--part No.amh5H91, 5
hercus 9 or 260 toolpost set screws--part No.amh5H782
NEW hercus handwheel pinion gear--part Nos.47, 5H631
hercus 63/64 compound gear
HERCUS 260ATM METRIC- INCH THREAD GEARS- part No.amh-ims009
hercus 9 and 260 way felt retainers--part Nos.amh16A, amh5H709, amh5H710
hercus 9 motor belt cover/guard--part No.645
NEW Hercus metric cross slide spindle nut--part Nos.935, 5H726
Hercus 9 or 260 idler gear bolt set--part No.104, 111, 5H585, 5H586
NEW hercus countershaft pivot/yoke--part No.M3
hercus 9 inch back gear--part No.72
NEW Hercus 260 fixed steady--part No.5HY54
Hercus quill gear guard--part No.79
260 compound casting--part No.5H755
NEW hercus 260 compound swivel--part No.5H751
faceplate for Hercus 260--part No.5H904
hercus 260 cross slide casting--part No.5H721
imperial compound spindle nut--part Nos.36, 5H752
hercus  260 spindle thread cover--part No.amh5H1091
Hercus 9 tailstock body-camlock--part No.620
hercus 9 or 260 tailstock cam assy--parts Nos.621, 625, 623, 5H78, 5H79, 5H80, 5H77
hercus 260 tailstock base--part No.5h71
260ATM leadscrew and bracket--part Nos.5h32,5h61
NEW or refurbished 260 or 9inch cross slide gib strip--part No.5H722, 45
9" roller bearing or plain headstock pulley cover/guard--part No.841, 630
NEW hercus tailstock handwheel--part No.4, 11, 5H88, 5H89
hercus countershaft tension assy--part Nos.m17, m6, m18, m119,m15,m13,m11,m16
hercus C model felt rebuild  kit--part No.9cfk
Hercus A model felt rebuild kit