NEW Hercus 9 apron handwheel taper pin No.1 x 1 1/2--part No.26a
$3.00
NEW Hercus 9 apron handwheel taper pin--part No.26a early Hercus 260's may also have these. ..
NEW Hercus tailstock handwheel taper pin--part No.4a
$3.00
NEW Hercus tailstock handwheel taper pin--part No.4a correct size as specified in the Hercus doc..
New Hercus 1st gearbox cone gear taper pin--part No.321
$3.00
New Hercus 1st gearbox cone gear taper pin--part No.321 correct size by Hercus parts list specs..
NEW Hercus 9 gearbox drive shaft collar taper pin--part No.335b
$3.00
NEW Hercus 9 gearbox drive shaft collar taper pin--part No.335b correct size as per Hercus parts..
NEW Hercus 9 countershaft yoke-pivot, plain bearing P-pattern--part No.M103
$135.00
NEW Hercus 9 countershaft yoke-pivot, P pattern plain bearing--part No.M103 There are four diffe..
NEW Hercus 4-way toolpost handle--part No.5H785
$22.00
NEW Hercus 4-way toolpost handle--part No.5H785 made to replace the original Kipp handle supplie..
NEW 3/8 nut BSW plain--part Nos.M9, 643, 648, 783, 5H55
$0.45
NEW 3/8 BSW nut plain used in several places throughout Hercus machinessame finish as original. ..
NEW Hercus 9 or 260 lathe imperial thread chasing dial worm gear--part No.5H945
$53.00
NEW Hercus lathe imperial thread chasing dial worm gear--part No.5H945 ..
New dial for Hercus imperial thread chasing dial indicator--part No.5H943
$29.00
New dial for Hercus imperial thread dial indicator--part No.5H943 this a copy of the genuine par..
NEW Hercus imperial thread chasing dial--part No.5HA51
$198.00
NEW Hercus imperial thread chasing dial--part No.5HA51 original cast iron manufacture and bronze ge..
NEW Hercus apron selector handle taper pin--part No.398
$3.00
NEW Hercus apron selector handle taper pin, steel --part No.398..
NEW Hercus plain carriage stop --part No.5HA77
$93.00
NEW Hercus plain carriage stop--part No.5HA77 cast iron Australian made..
NEW Hercus 260 tailstock handwheel spring pin--part No.5H90
$0.50
NEW Hercus260 tailstock handwheel spring pin--part No.5H90 some early 260's may have taper pins,..
NEW Hercus 260 apron selector roll pin--part No.5H664
$0.50
NEW Hercus 260 apron selector roll pin--part No.5H664 some early models may have taper pins,&nbs..
NEW Hercus 260 apron handwheel roll pin--part No.5H635
$0.50
NEW Hercus 260 apron handwheel roll pin--5H635 early models may use a taper pin part No.26a..
NEW REPLACEMENT PARTS- HERCUS LATHES (403)
New & Used Machine Parts-- HERCUS, SHERATON, SOUTH BEND (507)
BEARINGS (12)
ELECTRIC MOTORS (9)
general engineering (16)
Hercus 0 Mill parts (24)
LATHE GEARS (87)
LATHE TOOLING (56)
MACHINE PLATES-THREADING, SPEEDS, FEEDS, ETC (23)
MILLING TOOLS (2)
PUBLICATIONS (11)
South Bend GS26 New parts (22)
SPECIAL TOOLS FOR HERCUS LATHES (2)
V-BELTS & PULLEYS (19)
SECONDHAND MACHINERY (1)
PRIVATE SALES (0)