NEW REPLACEMENT PARTS- HERCUS LATHES (399)
New & Used Machine Parts-- HERCUS, SHERATON, SOUTH BEND (508)
BEARINGS (12)
ELECTRIC MOTORS (9)
general engineering (16)
Hercus 0 Mill parts (24)
LATHE GEARS (87)
LATHE TOOLING (56)
MACHINE PLATES-THREADING, SPEEDS, FEEDS, ETC (23)
MILLING TOOLS (2)
PUBLICATIONS (11)
South Bend GS26 New parts (22)
SPECIAL TOOLS FOR HERCUS LATHES (2)
V-BELTS & PULLEYS (19)
SECONDHAND MACHINERY (1)
PRIVATE SALES (0)
1/2 inch 5 PIECE INDEXABLE LATHE TOOL SET---part No.23000
$65.00
FOR SALE IS THIS NEW INDEXABLE CARBIDE TIP SET 1/2 inch SHANKS 5 PIECE SET USES COMMONLY AVA..
![hercus 9 lathe 7 3/8" faceplate--part No.160](https://australianmetalworkinghobbyist.com/image/cache/catalog/product/7.5inch-faceplate-500x500-268x299.jpg "hercus 9 lathe 7 3/8" faceplate--part No.160")
hercus 9 lathe 7 3/8" faceplate--part No.160
$95.00
Hercus 9" lathe cast iron faceplate 7 3/8" diameter threaded 1 1/2" 8tpi will also suit ..
hercus 9 dog plate--part No.78
$49.00
used hercus 9" dog plate for turning between centres excellent condition..
hercus 9 or 260 lantern toolpost--part No.5HA035
$65.00
used lantern toolpost from hercus 9" lathe ..
Hercus lantern toolpost wedge, half moon--part No.5H795, 54
$17.00
NEW Australian made half moon, wedge insert for Hercus or South bend lantern-american toolpost..
NEW Hercus 260 fixed steady--part No.5HY54
$335.00
NEW Hercus 260 fixed steady made using the original Hercus pattern and drawings...
hercus 9 lathe 4 inch chuck backing plate, cast iron--part No.160a
$71.10
AUSTRALIAN MADE 4" cast iron backing plate threaded 1 1/2 X 8tpi to suit Hercus 9", Sh..
New faceplate for Hercus 260--part No.5H904
$270.00
New Australian made 230mm faceplate to suit the Hercus 260 all models threaded 1 3/4" X ..
hercus 260 spindle thread cover--part No.5H1091
$25.00
 This NEW cover threaded for the Hercus 260 protects the spindle thread from damage and sw..
Hercus 9 lathe, 5 inch cast iron chuck backing plate--part No.160b
$91.50
Australian made 5 inch cast iron chuck backing plate threaded 1 1/2" X 8tpi to suit hercus 9..
AXA100 adaptor stud for hercus 260---part No.QC-03
$27.50
NEW custom made adaptor studfor mounting the AXA100 quickchange toolpost, as shown, to the her..
hercus 260 5inch cast iron chuck backing plate--part No.5H907
$91.50
Australian made Cast iron 5" chuck backing plate threaded for the Hercus 260 lathe 1 3..
Hercus 260 mt4-mt2 reducer sleeve--part No.5H922
$26.00
used mt4-mt2 reducing sleeve used in the headstock spindle with an mt2 dead centre and mt2 l..
Hercus 3/8 square spanner--part No.5H991, 55
$9.50
NEW 3/8" spanner for hercus, Sheraton and South Bend  lathes  ..